Mechanical Fastener Solutions for All Your Conveyor Needs. Rivet Hinged Fastener System

Mechanical Fastener Solutions for All Your Conveyor Needs. Rivet Hinged Fastener System

RIVET HINGED FASTENING Program


Rivet Hinged Fastening System is excellent for use on rubber-plied and PVC sound woven belting and for worn belts
unfit for vulcanized splices, providing overall performance and long existence with easy installation.  

WHY RIVET HINGED?

  • Mechanical fastener rating from 330 to 2000  PIW (60 to 350 kN/m)
  • Belts from 1/8″ to one” soon after skiving
  • Pulley diameters from 5″ to forty two” (125 to one hundred fifty mm)
  • Minimal-profile, Scalloped Edge® design is conveyor part suitable
  • Hinged splice – easily divided to eliminate, increase, or thoroughly clean belts
  • Rivet-attached for optimum resistance to pull out
  • Ideal for worn belting unfit for vulcanizing

Installation Approach

  • Portable tooling
  • Selection of hand or power installation

HY10 CONVEYOR BELT FASTENER

HY10  Fastening Method is excellent for substantial energy, Long length conveyor belt of a reduced-profile belt splice. Obtainable in ongoing lengths, the technique fits any belt width and supplies uniform stress throughout the entire belt width.

WHY LACING?  
Mechanical fastener ranking up to 200 PIW (35  kN/m)
Belts up to  thick
22#   seven.five-9.5mm
24#   9.5-twelve.5mm
26#   12.five-14mm
28#   fourteen-16mm

Minimal pulley diameter from 250 mm

Engineered to avert pieces from functioning free from the belt and into the product
Detachable hinge pin makes it possible for for easy cleaning and sanitation of belts
Tooth embed lengthwise in the belt, offering a robust, vice-like maintain.

Set up Approach
Pull rod type nailing device

HY6 STAPLE FASTENING Method

Staple Fastening Method is excellent for mining operations that favor a reliable, slender-looped staple splice.

WHY STAPLE?
Mechanical fastener rating up to 800 PIW (one hundred forty kN/m)
Belts from (8 mm to 13 mm) thick
Pulley diameters from 9″ to 12″ (225 mm to three hundred mm)

Performs with plied rubber and PVC belting
Beveled edges and recessed staple pockets produce a reduced-profile splice that is belt element suitable
Obtainable in metal and stainless metal

Quickly, accurate installation with RV6 installation resource and built-in belt stops

Set up Method
Moveable tooling
Hand installation 

Mechanical connectors distribute loads ­uniformly above the conveyor belt

Qualities
Kind:

bolted plate

Description

Engineering bolt plate fasteners permits for basic and very easily repairing or joining conveyor belt.

Straightforward to set up
Quick to install
No costly iinstallation instruments needed

Metal good quality : Carbon metal or use resistant carbon steel

Packaging :
Box of thirty fasteners (relying the variety)
Bucket of 240fasteners (based the variety)

You May possibly Like

 

Mechanical Fastener Solutions for All Your Conveyor Needs. Rivet Hinged Fastener System

Tags