T20 Remove Teeth Tansmission Industrial Conveyor Timing Belt

T20 Remove Teeth Tansmission Industrial Conveyor Timing Belt

*Many sorts of rubber,pvc and many others.content to select,free of charge time to contact me you should.

PU Flex Timing Belt/PU Actually Unlimited Timing Belt
*Polyurethane belt loop energy,by a unique thermoset molding process.
*High-high quality polyurethane substance resistant to dress in the belt and tear tesistant appropriate ties.
*A single of the core wire to improve belt power,tensile stregth,so that the belt has very good dimensional steadiness.
*Polyurethane power ring with little tolerances,can promise the precision of thickness and length.
*All of the previously mentioned characteristics make the ployurethane ring has a higher power with the physical and chemical steadiness.
Polyurethane belt has the subsequent qualities:
*Mechanical properties                                                                *Chemical homes
 Positive suit,synchronous,running                                                   Resistant to aging,water resolution,UVUVA,anti-ozne
 Constant length,no put up-elongation                                              Working temperature:-30ºC-80ºC(short time could 
 Low noise                                                                                      withstand 110ºC)
 Wear resistant                                                                               Resistant towards simple oils,fats and petrol
 Low-maintenance                                                                          Resistant to some acids
 Highly adaptable
 Belt speeds up to 80m/s

This spherical PU timing belt especially             
suited for low load synchronous transmission,
such as:office automation system and house appliances.

Connected Belt

1.Ring belt from the steady steel main and the thermoplastic polyurethane content,is a real no interface ring belt.
two.Ring belt to make sure the functions and operation underneath higher load,this energy transmission belt for high-velocity and substantial load transfer.
three.Ring belt duration may be from 1.seven-hundred to 22.000 meters.
four.Ring belt can be CZPT according to customer’s specifications of diverse types,this kind of as:AT20,AT10,T10,T5,AT5,HTD8M,STD8M…..
*Ring belt particular processing:
  1.Tooth area and nylon material
  2.Can be rolled back again a special pattern grinding and drilling
  3.can go over the again of the belt thicking
About opening belt
*Opening belt concluded with a continuous duration,the center and the sides parallel to the wire core.CZPT roll size is 50 or 100 meters.
*Open up (PU) leather-based belt with a variety of different main choice,such as kevlar main,extremely flexible main(HF)substantial-overall performance(HP)and higher toughness(HPF)
*Manufacturing tolerance of small reliable transmission and has a dimensional stability.The manufacturing method or in the enamel and tooth include a layer of nylon to ensure that purposes managing in the special characterstics of the very same.Also thicker layer of polyurethane in the belt or the back of the red plastic to avoid corrosion or substantial load.

Product Record
*Types of product to choose
MXL

Spec. Teeth Spec. Tooth Spec. Enamel Spec. Teeth Spec. Tooth Spec. Tooth Spec. Tooth Spec. Tooth
26MXL 33 36MXL 45 37MXL 46 38MXL 48 41MXL fifty one 46MXL 58 53MXL 66 54MXL 67
55MXL 70 56MXL 71 57MXL seventy two 58MXL 73 59MXL 74 60MXL seventy five 61MXL 76 63MXL 79
64MXL eighty two 65MXL 83 71MXL 89 72MXL ninety 73MXL ninety two 74MXL 93 75MXL 95 76MXL 96
77MXL 97 78MXL ninety eight 80MXL one hundred 81MXL  102   82MXL 103 84MXL a hundred and five 85MXL 106 86MXL 107
87MXL 110 88MXL 112 89MXL 114 92MXL 115 93MXL 119 94MXL 120 95MXL 121 96MXL 122
97MXL 123 98MXL 124 99MXL 125 100MXL 126 101MXL 127 102MXL 128 105MXL 132 107MXL 134
109MXL 136 112MXL 140 114MXL 143 115MXL 144 116MXL a hundred forty five 120MXL one hundred fifty 122MXL 153 124MXL 155 
126MXL 157 128MXL one hundred sixty 132MXL a hundred sixty five 140MXL 175 143MXL 179 144MXL 180 145MXL 181 148MXL 185
150MXL 187 151MXL 189 152MXL 190 153MXL 191 154MXL 192 155MXL 193 156MXL 195 160MXL 200
168MXL 210 184MXL 230 200MXL 250 204MXL 255 205MXL 256 208MXL 260 348MXL 435 400DMXL 500

T10 

Spec. Tooth Spec. Tooth Spec. Enamel Spec. Teeth Spec. Enamel Spec. Enamel Spec. Teeth Spec. Tooth
T10*260 26 T10*three hundred thirty T10*330 33 T10*370 37 T10*390 39 T10*four hundred forty T10*410 forty one T10*440 44
T10*450 forty five T10*460 forty six T10*480 forty eight T10*500 fifty T10*510 51 T10*530 53 T10*540 54 T10*550 55
T10*560 56 T10*600 60 T10*610 61 T10*620 62 T10*630 sixty three T10*650 sixty five T10*660 sixty six T10*680 68
T10*690 69 T10*seven-hundred 70 T10*720 72 T10*730 73 T10*750 seventy five T10*780 seventy eight T10*800 eighty T10*810 eighty one
T10*830 83 T10*840 eighty four T10*850 eighty five T10*860 86 T10*880 88 T10*890 89 T10*900 90 T10*910 91
T10*920 92 T10*950 95 T10*960 ninety six T10*970 97 T10*980 ninety eight T10*1000 100 T10*1571 one zero one T10*1050 one hundred and five
T10*1080 108 T10*1100 one hundred ten T10*1110 111 T10*1140 114 T10*1150 a hundred and fifteen T10*1200 120 T10*1210 121 T10*1240 124
T10*1250 one hundred twenty five T10*1260 126 T10*1280 128 T10*1300 130 T10*1320 132 T10*1350 one hundred thirty five T10*1360 136 T10*1390 139
T10*1400 one hundred forty T10*1410 141 T10*1420 142 T10*1440 144 T10*1450 145 T10*1460 146 T10*1500 150 T10*1520 152
T10*1560 156 T10*1580 158 T10*1600 a hundred and sixty T10*1640 164 T10*1700 170 T10*1750 one hundred seventy five T10*1760 176 T10*1780 178
T10*1800 a hundred and eighty T10*1850 185 T10*1860 186 T10*1880 188 T10*1960 196 T10*1980 198 T10*2000 two hundred T10*2571 202
T10*2100 210 T10*2120 212 T10*2160 216 T10*2170 217 T10*2200 220 T10*2250 225 T10*2500 250 T10*2800 280

H

Spec. Enamel Spec. Enamel Spec. Tooth Spec. Enamel Spec. Enamel Spec. Enamel Spec. Tooth Spec. Tooth Spec. Tooth
200H forty 225H forty five 250H fifty 260H 52 270H fifty four 280H 56 300H sixty 315H sixty three 330H sixty six
350H 70 390H seventy eight 420H 84 450H 90 460H ninety two 470H ninety four 480H ninety six 510H 102 540H 108
560H 112 570H 114 600H one hundred twenty 630H 126 700H 140 750H one hundred fifty 900H 180        

 T2.5

Spec. Teeth Spec. Tooth Spec. Enamel Spec. Teeth Spec. Tooth Spec. Enamel Spec. Teeth Spec. Tooth
T2.five*a hundred and twenty 48 T2.five*a hundred forty five fifty eight T2.5*a hundred and sixty sixty four T2.five*a hundred and eighty 72 T2.five*182.five seventy three T2.5*200 80 T2.five*215 86 T2.five*240 ninety six
T2.five*245 98 T2.5*260 104 T2.5*285 114 T2.5*330 132 T2.5*380 152 T2.five*420 168 T2.five*500 two hundred T2.five*600 240
T2.5*650 260 T2.five*780 312 T2.5*950 380                    

AT5

Spec. Teeth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Tooth
AT5*375 75 AT5*390 seventy eight AT5*455 ninety one AT5*490 ninety eight AT5*500 a hundred

AT10

Spec. Enamel Spec. Enamel Spec. Enamel Spec. Teeth Spec. Teeth Spec. Tooth Spec. Tooth Spec. Teeth
AT10*five hundred 50 AT10*600 60 AT10*660 sixty six AT10*seven-hundred 70 AT10*730 73 AT10*780 78 AT10*800 800 AT10*840 eighty four
AT10*920 ninety two AT10*960 ninety six AT10*980 98 AT10*1050 one hundred and five AT10*1080 108 AT10*1100 a hundred and ten AT10*1150 115 AT10*1200 one hundred twenty
AT10*1210 121 AT10*1250 125 AT10*1280 128 AT10*1300 one hundred thirty AT10*1350 one hundred thirty five AT1390 139 AT10*1400 a hundred and forty AT10*1480 148
AT10*1600 160 AT10*1700 one hundred seventy AT10*1860 186 AT10*1900 one hundred ninety                

S3M

Spec. Teeth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Tooth Spec. Tooth Spec. Enamel Spec. Enamel
S3M120 forty S3M144 forty eight S3M150 fifty S3M183 sixty one S3M192 sixty four S3M201 67 S3M210 70 S3M231 seventy seven
S3M237 seventy nine S3M246 eighty two S3M315 105 S3M357 119 S3M418 a hundred and forty S3M420 one hundred forty S3M432 a hundred and forty four S3M453 151
S3M459 153 S3M486 162 S3M492 164 S3M504 168 S3M510 one hundred seventy S3M513 171 S3M519 173 S3M525 one hundred seventy five
S3M528 176 S3M537 179 S3M543 181 S3M546 182 S3M549 183 S3M555 185 S3M564 188 S3M571 191
S3M573 191 S3M585 195 S3M588 196 S3M600 200 S3M612 204 S3M705 235 S3M738 246 S3M780 260
A3M717 239 D3M327 109                        

HTD3M

Spec. Tooth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Tooth Spec. Tooth Spec. Tooth Spec. Enamel
3M135 forty five 3M144 forty eight 3M171 57 3M174 58 3M177 59 3M189 sixty three 3M195 65 3M207 sixty nine
3M225 75 3M228 76 3M243 eighty one 3M255 85 3M264 88 3M276 ninety two 3M288 96 3M294 98
3M300 a hundred 3M312 104 3M315 a hundred and five 3M324 108 3M336 112 3M345 a hundred and fifteen 3M357 119 3M360 a hundred and twenty
3M366 122 3M375 a hundred twenty five 3M384 128 3M402 134 3M420 a hundred and forty 3M423 141 3M435 one hundred forty five 3M456 152
3M459 153 3M462 154 3M468 156 3M471 157 3M483 161 3M486 162 3M495 a hundred sixty five 3M504 168
3M510 170 3M522 174 3M525 one hundred seventy five 3M537 179 3M540 180 3M549 183 3M555 185 3M564 188
3M573 191 3M606 202 3M657 219 3M669 223 3M693 231 3M699 233 3M708 236 3M720 240
3M738 246 3M879 293 3M1569 523 3M2040 680                

*We also have product :L/XL/XXL/T5/AT3/H/PK/PJ/PH/DMB/DT5/DR/PL/MB/DAT10/DT10/S2M/S5M/5M/HTD2M/HTD5M/HTD14M/HTD8M,or as your requirment to make new design but require to shell out design cost,If you have no amount,observed remember to!

Application 

About firm
ZheJiang Peng Qian Transmission Gear Co.,Ltd. 
Was recognized in March 2004,have 16 years of generation expertise.Neighborhood in No. eleven, Lane 243, Jiugan Highway, Sijing Town, Xihu (West Lake) Dis. District, ZheJiang ,China.Primary deal in transmission belt and modular chain belt and many others.creation quantity more than 50000 pieces one particular calendar year.all varieties of rubber content,pvc and pu content and so on.settle for specical generating as your requirment. We support custom made provider.and delivery time most quickest 1day according  to your orders.Firms adhering to the “integrity,high quality,value,and provider very first,steady innovation” business philosophy,devoted to supply substantial high quality merchandise and large-top quality provider for the consumer,the firm continutes to increase the scale of improvement,buyers throughout the place.

If you have interested,cost-free time to contact me make sure you.

 
 

    
 

T20 Remove Teeth Tansmission Industrial Conveyor Timing Belt

Tags